Kia Picanto: Evaporative Emission Control System / Canister

Kia Picanto JA 2017-2024 Service & Repair Manual / Emission Control System / Evaporative Emission Control System / Canister

Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Remove the fuel tank assembly.
(Refer to Fuel System - "Fuel Tank")
3.
Disconnect the vapor (A) and ventilation hose (B).
4.
Remove the mounting bolt (C) and then remove the canister (D).
Canister assembly mounting bolt :
0.3 - 0.6 N·m (0.3 - 0.6 kgf·m, 2.2 - 4.3 lb·ft)

Installation
1.
Install in the reverse order of removal.
Inspection
1.
Check for the following items visually.
Cracks or leakage of the canister
Loose connection, distortion, or damage of the vapor hose/ tube

A: Canister ↔ Fuel Tank
B: Canister ↔ Intake Manifold
C: Canister ↔ Atmosphere
Evaporative Emission Control System
Description and operation Description Evaporative Emission Control System prevents fuel vapor stored in fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel ...

Purge Control Solenoid Valve (PCSV)
Specifications Specification Item Specification Coil Resistance (Ω) 18.5 - 22.5 [23°C(73.4°F)] Description ...

Other information:

Kia Picanto JA 2017-2024 Service & Repair Manual: Back View Camera System


Components and components location Component Location 1. Back view camera 2. AVN head unit 3. steering angle sensor Description and operation Description 1. To display back of the vehicle to assist the driver, it receives vehicle rearside image signal from the rearview ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Interior Trim


Components and components location Components 1. Front pillar trim assembly 2. Front door scuff trim assembly 3. Center pillar upper trim assembly 4. Rear pillar trim assembly 5. Cowl side trim assembly 6. Center pillar lower trim assembly 7. Rear door scuff trim assembly ...

Copyright © www.kpicanto.com 2017-2024