Kia Picanto: Manual climate control system / Automatic climate control system

Kia Picanto JA 2017-2025 Owner's Manual / Features of your vehicle / Manual climate control system / Automatic climate control system

To defog inside windshield

1. Set the fan speed to the desired position.

2. Select desired temperature.

3. Press the defrost button ().

4. The air conditioning will be turned on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.

If the air conditioning and outside (fresh) air position are not selected automatically, adjust the corresponding button manually. If the position is selected, lower fan speed is adjusted to a higher fan speed.

To defrost outside windshield

1. Set the fan speed to the highest (extreme right) position.

2. Set the temperature to the extreme hot (HI) position.

3. Press the defrost button ().

4. The air conditioning will be turned on according to the detected ambient temperature and outside (fresh) air position will be selected automatically.

If the position is selected, lower fan speed is adjusted to a higher fan speed.

Manual climate control system
To defog inside windshield 1. Select any fan speed except “0” position. 2. Select desired temperature. 3. Select the or position. 4. The outside (fresh) air and air conditioning will be ...

Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position. To ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Motor Driven Power Steering


Description and operation Description MDPS (Motor Driven Power Steering) system uses an electric motor to assist the steering force and it is an engine operation independent steering system. MDPS control module controls the motor operation according to information received from the ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Rear Seat Assembly


Components and components location Component Location 1. Rear seat cushion assembly 2. Rear seat back assembly Repair procedures Replacement    Put on gloves to protect your hands. 1. Remove the rear seat cushion assembly (A). 2. Disco ...

Copyright © www.kpicanto.com 2017-2025