Kia Picanto: Towing / Removable towing hook

1. Open the tailgate, and remove the
towing hook from the tool case.
2. Remove the hole cover pressing the
upper (front) part of the cover on
the bumper.
3. Install the towing hook by turning it
clockwise into the hole until it is
fully secured.
4. Remove the towing hook and install
the cover after use.
If emergency towing is necessary, we
recommend having it done by an authorized
Kia dealer or a commercial
tow-truck service. Proper lifting and
towing procedures are necessary to
prevent d ...
f towing is necessary, we recommend
you to have it done by an authorized
Kia dealer or a commercial tow truck
service.
If towing service is not available in an
emergency, your vehicle may b ...
Other information:
Repair procedures
Replacement
1. Loosen the front door checker (A) mounting bolt.
Tightening torque :
19.6 - 29.4 N·m (2.0 - 3.0 kgf·m,14.5 - 21.7 lb·ft)
2. Detach the clips, and then remove the front door side weatherstrip (A).
3. Install in the reverse or ...
General information
General Troubleshooting Information
Before Troubleshooting
1.Check applicable fuses in the appropriate fuse/relay box.
2.Check the battery for damage, state of charge, cleanliness and tight connections.
G 1.0 MPI (Refer to Engine Electrical System - "Charging S ...