Kia Picanto: Rear Glass Defogger / Rear Glass Defogger Switch

Kia Picanto JA 2017-2025 Service & Repair Manual / Body Electrical System / Rear Glass Defogger / Rear Glass Defogger Switch

Repair procedures
Inspection
1.
In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).
The diagnostic system (KDS/GDS) provides the following information.
(1)
Self diagnosis : Checking failure and code number (DTC)
(2)
Current data : Checking the system input/output data state
(3)
Actuation test : Checking the system operation condition
(4)
Additional function : Controlling other features including system option setting and zero point adjustment
2.
Select the 'Car model' and the 'Body Control Module (BCM)' to be checked in order to check the vehicle with the tester.
3.
Select the 'Current Data' menu to search the current state of the input/output data.

4.
To forcibly actuate the input value of the module to be checked, select option 'Actuation Test'

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and A/C controll unit.
(Refer to Heating, Ventilation, Air conditioning - "Heater & A/C Control Unit (Manual)")
(Refer to Heating, Ventilation, Air conditioning - "Heater & A/C Control Unit (Full Automatic)")
Installation
1.
Install the heater and A/C control unit.
2.
Connect the negative (-) battery terminal.
Rear Glass Defogger Printed Heater
Repair procedures Inspection    • Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply pressur ...

Rear Parking Assist System
Specifications Specification Item Specification Ultrasonic sensor Voltage rating DC 12V Detecting range 11.8 - 39.3 in (30 - 100 ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Outside Rear View Mirror


Components and components location Component Location 1. Outside rear view mirror Repair procedures Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove ...

Kia Picanto JA 2017-2025 Owner's Manual: Position lamp bulb replacement (Headlamp Type A)


1. Open the hood. 2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly. 3. Remove the bulb from bulb-socket by pulling it out. 4. Insert a new bulb by inserting ...

Copyright © www.kpicanto.com 2017-2025