Kia Picanto: Floor Console / Rear Console Cover
Components and components location
Repair procedures
Put on gloves to protect your hands. |
•
| Use a plastic panel removal tool to remove interior trim pieces without marring the surface. |
•
| Be careful not to bend or scratch the trim and panels. |
|
1. | Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
|
2. | Loosen the screws.
|
3. | Remove the rear console cover (A) by using a remover.
|
4. | Install in the reverse order of removal. •
| Make sure the connector is connected properly. |
•
| Replace any damaged clips. |
|
|
Components and components location
Component Location
1. Floor console assembly
Repair procedures
Replacement
Put on gloves to protect your hand ...
Components and components location
Component Location
1. Console armrest
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Other information:
Description and operation
Description
In
order to ensure adequate brake power assistance in every situation, the
brake booster is equipped with a partial vacuum sensor. The brake
booster vacuum pressure sensor is located beside the brake booster.
Repair procedures
Inspec ...
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.•
Be careful not to bend ...