Kia Picanto: Front Seat Belt / Front Seat Belt Buckle
Components and components location

1. Front seat belt buckle
|
|
Repair procedures
1. | Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. | Disconnect the front seat belt wiring mounting clips (A).
 |
3. | Remove the front seat belt buckle (A) after loosening the mounting bolt.
Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft) |
 |
4. | Install in the reverse order of removal. •
| Make sure that the connector is plugged in properly. |
•
| Replace any damaged clips. |
|
|
Components and components location
Component Location
1. Height Adjuster
Repair procedures
Replacement
1.Remove the front seat belt upper anchor.
(Refer to Front Se ...
Repair procedures
Adjustment
1. After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left.
2. Adjust the hood height by turning the hood ove ...
Other information:
Components and components location
Component Location
1. Seat heater unit 2. Front seat back heater 3. Front seat cushion heater
Schematic diagrams
Circuit Diagram
Repair procedures
Inspection
1.Check for continuity and measure the resistance between termina ...
Components and components location
Components
1. Snap ring 2. Bearing 3. Axle assembly 4. Brake disc dust cover 5. Wheel hub assembly 6. Wheel brake disc 7. Brake disc fixing screw 8. Wheel / Tire 9. Wheel nut
Repair procedures
Removal
1. Remove the front/rear wheel tire (A ...