Kia Picanto: Front Door / Front Door Inside Handle
Repair procedures
Put on gloves to protect your hands. |
•
| Use a plastic panel removal tool to remove interior trim pieces without marring the surface. |
•
| Be careful not to bend or scratch the trim and panels. |
|
1. | Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. | Separate the front door inside handle (A) after loosening the screws.
 |
3. | Remove the front door inside handle (B) after disconnecting the inside handle cage (A).
 |
4. | Install in the reverse order of removal. •
| Make sure the connector is connected properly. |
•
| Make sure the door locks/unlocks and opens/closes properly. |
•
| Replace any damaged clips. |
|
|
Components and components location
Component Location
1. Front door trim
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Components and components location
Component Location
1. Front door window glass
Repair procedures
Replacement
Put on gloves to protect your hand ...
Other information:
Components and components location
Components
Connector Pin Information
No.
Connector A
Connector B
1 Rear door left speaker (+) - 2 Rear door left speaker (-) MIC (+) 3 - - 4 - - 5 - Antenn ...
Description and operation
Description
The
SRSCM shall monitor the status of the driver and front passenger seat
belt buckle. The SRSCM provides one pin each for the driver and front
passenger seat belt buckle status input. The seat belt buckle circuit
operates from internal boost volta ...