Kia Picanto: Power Train / Valve Clearance
Repair procedures
[Kappa 1.0 MPI, 1.0 FFV, 1.0 T-GDI]
Check the valve clearance.
If necessary, adjust the valve clearance by replacing the tappets.
Repair procedures
Inspection
[On vehicle inspection]
1. Accelerate the engine to about 3,000 rpm 3 times or more.
2. Remove the spark plug.
3. Check the spark plug visually. If the elect ...
Repair procedures
Inspection
Vapor hose
1. Check all the clamps for tightness and the connections for leakage.
2. Visually check the vapor lines and hoses for cracks, leaks, loose connections ...
Other information:
Components and components location
Components
Control Panel
Connector pin function
No.
Connector A
Connector B
1 Battery PAB IGN1 2 ISG Battery (+) PAB On signal 3 Illumination (+) PAB Of ...
The transmitter uses a 3 volt lithium
battery which will normally last for
several years. When replacement is
necessary, use the following procedure.
1. Insert a slim tool into the slot and
gently pry open the transmitter
center cover.
2. Replace the battery with a new
battery (CR203 ...