Kia Picanto (JA): Tailgate / Tailgate Lift

Repair procedures

Replacement
   
Be careful as the tailgate may fall down on people when the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open.
1.
Using a screwdriver (A), lift up slightly the socket clips (B) of both ends on the lifter (D), and then remove the lifter from the bracket (C).

2.
Push the socket of the lifter into the bracket for installation.
   
Make sure the tailgate locks and opens properly and locks securely.

    Components and components location Component Location 1. Tailgate latch assembly Repair procedures Replacement    Put on gloves to protect your hands.

    Repair procedures Replacement    Do not apply sealant to the body. 1. Remove the tailgate weatherstrip (A). 2. Install in the reverse order of removal.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Rear Washer Switch

    Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Rear Washer Motor

    Repair procedures Inspection 1.With the washer motor connected to the reservoir tank, fill the reservoir tank with water.    Before filling the reservoir tank with water, check the filter for foreign material or contamination.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0192