| Replacement |
| 1. | Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
|
| 2. | Remove the sunroof sunshade.
(Refer to Sunroof - "Sunroof Sunshade")
|
| 3. | Push down the slide and remove the drip link assembly (A).
|
| 4. | Separate the drip link (B) and guide (A).
|
| 5. | Remove the shoe (A).
|
| 6. | Separate the guide assembly (A) and the cable (B) by pushing them in the direction of the arrow.
|
| 7. | Install in the reverse order of removal.
|
Repair procedures Replacement 1.Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2.Remove the drip rail assembly (A) after loosening the mounting screws.
Components and components location Component Location 1. Quarter fixed glass Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Components [Standard Window Motor] [Safety Window Motor] Repair procedures Inspection • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.Disconnect the negative (-) battery terminal.