Kia Picanto: Features of your vehicle / Rearview camera

The rearview camera will activate when
the back-up light is ON with the ignition
switch ON and the shift lever in the R
(Reverse) position.
This system is a supplemental system
that shows behind the vehicle through
the navigation display while backingup.
WARNING
- This system is a supplementary
function only. It is the responsibility
of the driver to always check
the inside/outside rearview mirror
and the area behind the vehicle
before and while backing up because
there is a dead zone that
can't be seen through the camera.
- Always keep the camera lens
clean. If lens is covered with foreign
matter, the camera may not
operate normally.
If you don’t hear an audible warning
sound or if the buzzer sounds intermittently
when shifting the gear to the R
(Reverse) position, this may indicate a
malfunction in the rear parking assi ...
Battery saver function
The purpose of this feature is to prevent
the battery from being discharged.
The system automatically
turns off the parking lights when the
driver removes the ig ...
Other information:
Description and operation
Description
Driver
Anchor Pretensioner operates as well as Belt Pretensioner at the same
time If it gets into its deploy condition after a collision. It is
located at near anchor on driver seat and it is an equipment to make up
for the existing short stroke. D ...
Components and components location
Components
[RH]
1. BJ assembly 2. Clip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Circlip 12. TJ housing 13. Circlip
[LH]
1. BJ assembly 2. BJ circlip 3. ...