Other information:
Repair procedures
Removal
1.Remove the universal joint bolt (A).
Tightening torque :
32.4 - 37.3 N·m (3.3 - 3.8 kgf·m, 23.9 - 27.5 lb·ft)
•
Keep the gear in the neutral range to prevent any damage on the clock spring ...
The driver can set the TPMS by following
procedures below:
1. Inflate all tires to the recommended
pressure.
2. Start the engine, make sure the vehicle
is not moving, and press the
TPMS switch (2) left side on the
driver’s seat for over 3 seconds.
3. Check if the () warning
indicato ...