| Components |
| [6:4 folding type] |

| 1. Rear seat cushion pad 2. Rear seat cushion covering 3. Rear seat back covering 4. Rear seat back pad 5. Rear seat headrest guide 6. Rear seat headrest | 7. Rear seat silence cloth 8. Rear seat back frame 9. Rear seat back upper bezel 10. Rear seat back tether anchor cover 11. Rear seat back webbing guide |
| [bench type] |

| 1. Rear seat cushion pad 2. Rear seat cushion covering 3. Rear seat back silence cloth 4. Rear seat back frame 5. Rear seat back webbing guide | 6. Rear seat back upper bezel 7. Rear seat back covering 8. Rear seat back pad 9. Rear seat headrest guide 10. Rear seat headrest |
Repair procedures Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.
Components and components location Component Location 1. Rear seat cushion assembly 2. Rear seat back assembly Repair procedures Replacement Put on gloves to protect your hands.
Specifications Specification Item Type Bulb Watt (W) Front Headlamp Halogen (Position lamp) Low/High H4 LL 55/60 Turn signal lamp PY21WLL 21 Position lamp W5WLL 5 Halogen (Position lamp + DRL) Low/High HB3 (9005HL+) 60 Turn signal lamp LED LED Po
Repair procedures Replacement 1.Disconnect the negative (-) battery terminal. 2.Remove the heater unit. (Refer to Heater - "Heater Unit") 3.Remove the heater core cover (A) after loosening the mounting screws. 4.Pull out the heater core (A) from the heater unit.