Kia Picanto (JA): Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve

Kia Picanto (JA) 2017-2026 Service & Repair Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve

Description and operation

Operation Principle

Repair procedures

Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).
PCV valve :
1.89 - 2.84 N·m (0.19 - 0.29 kgf·m, 1.40 - 2.09 lb·ft)

Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check for plunger movement.

   
If the plunger does not move (PCV valve is stuck), clean or replace the valve.
Installation
1.
Install in the reverse order of removal.

    Schematic diagrams Schematic Diagram Repair procedures Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve.

    Description and operation Description Evaporative Emission Control System prevents fuel vapor stored in fuel tank from vaporizing into the atmosphere.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Smart Key

    Repair procedures Smart Key Smart Key Code Saving 1. Connect the DLC cable of KDS/GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on KDS/GDS. 2. Select the vehicle model and then do "Smart key code saving".

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Blower Resistor (Manual)

    Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.Disconnect the negative (-) battery terminal.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0299