Other information:
Repair procedures
Inspection
1.Disconnect the negative (-) battery terminal.
2.Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.Remove the hands free mic (A) after loosening the mounting screws.
4.Check tshe continuity of between terminals.
...
Repair procedures
Smart Key
Smart Key Code Saving
1. Connect
the DLC cable of KDS/GDS to the data link connector (16 pins) in driver
side crash pad lower panel, turn the power on KDS/GDS.
2. Select the vehicle model and then do "Smart key code saving".
3. After selecting "Smart ...