Kia Picanto (JA): Body (Interior and Exterior) / Hood
Repair procedures
| Adjustment |
| 1. | After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. |
| 2. | Adjust the hood height by turning the hood overslam bumpers (C). |
| 3. | After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down, or right and left.
|
Components and components location Component Location 1. Front seat belt buckle Repair procedures Replacement 1.Remove the front seat assembly.
Components and components location Component Location 1. Hood assembly Repair procedures Replacement Be careful not to damage the hood and body.
Other information:
Kia Picanto (JA) 2017-2026 Service & Repair Manual: Rear Washer Switch
Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).
Kia Picanto (JA) 2017-2026 Service & Repair Manual: Blower Unit
Components and components location Component Location 1. Blower Unit Components 1. Intake Actuator 2. Intake Case [Lower] 3. Air Filter 4. FET 5. Resister 6. Intake Seal 7. Intake Case [Upper] 8. Intake Door Assembly 9. Anti Noise Pad 10.
Categories
- Manuals Home
- Kia Picanto Owners Manual
- Kia Picanto Service Manual
- Engine Oil and Filter
- Timing Chain
- Front Disc Brake
- New on site
- Most important about car
