Kia Picanto (JA): Front Door / Front Door Belt Outside Weatherstrip

Kia Picanto (JA) 2017-2026 Service & Repair Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Outside Weatherstrip

Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
•
Be careful not to bend or scratch the trim and panels.
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Disconnect the outside rear view mirror connector (A) and loosen the nuts (B).

3.
Remove the outside rear view mirror (A).

4.
Remove the front door belt outside weather strip (A).

5.
Install in the reverse order of removal.
   
•
Check that glass operation is normal.
•
Check the damage glass channel, and replace if necessary.
•
Adjust glass if necessary.

    Repair procedures Replacement 1.Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2.Remove the front door belt inside weatherstrip (A).

    Repair procedures Replacement 1. Loosen the front door checker (A) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Horn

    Components and components location Component Location 1. Horn switch 2. Horn relay 3. Horn 4. Clock spring Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the engine room under cover. G 1.

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Smart Key

    Repair procedures Smart Key Smart Key Code Saving 1. Connect the DLC cable of KDS/GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on KDS/GDS. 2. Select the vehicle model and then do "Smart key code saving".

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0198