The system will be disarmed when: Transmitter - The door unlock button is pressed. - The engine is started. - The ignition switch is in the “ON” position for 30 seconds or more.
Mechanical key Turn the key toward the rear of the vehicle to lock and toward the front of the vehicle to unlock. If you lock/unlock the door with a key, the doors will lock/unlock.
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Open the tailgate. 3. Loosen the high mounted stop lamp mounting nuts (A). 4. Disconnect the washer nozzle (A) and high mounted stop lamp connector (B). 5. Remove the high mounted stop lamp (C).
Components and components location Components Connector Pin Information No. Connector A Connector B Connector C 1 - IGN2 Relay_output Battery (+)_Signal 2 SSB Switch1 signal_input P-CAN (Low) - 3 Driver door o